110V Automatic Platform Paint Shaker，Manual Clamping Paint Mixer 5.28Gal 750W US

Description

110V Manual  Clamping Paint Shaker
Summarization
Many thanks for using our manual clamping  paint shaker: this machine is automatic controlled by new  style alarm time-setter. When the operation time of the  machine reaches the set time, it will stop automatically and  the alarm will sound. The machine will stop automatically  when the door is opened due to excellent safety and  features. Silent operation and added safety. The can is  shaking fully at high speed and the highest speed of it is  it can mix the paint in 30 minutes, so that highly increase  its efficiency and save time.
Specifiction
Voltage
110V/
60Hz
Power
0.75KW
Mixing range
0.5-20L(0.13-5.28GAL)
Equipment keeping  environment temperature
-20~50℃
Using environment,  operating temperature
-10~40℃
Humidity
35%－90%（No frost）
Operation way
continue shake up and down
Use notice
1) This machine is suitable  to mix the non-volatile liquid not the food liquid.
2) This machine must connect to the earth, or will have the  danger of shocked by electricity.
3) Only the special technique worker or the people trained  can do the work of installation and operation and  maintenance.
4) Suitable power: AC110V,
60Hz (Note:  the product must be 60Hz, otherwise the fuse will burn)
5) Take care of the machine surface to avoid any damage;  machine should put on the firm and level place.
6) Cut off the electricity before maintenance and check to  avoid any unexpected start operation.
7) Mustn’t leave any tools or sundries inside of the  machine.
8) Should assure the function complete of the machine after  the maintenance.
9) The installation environment should apply to the local  environment (published by the authority department). Don’t  pile the paint can around the machine, mustn’t store the  tinder inside the machine. Should cut off the power and take  out the paint can after work.
10) Should put a “MUSTN’T SMOKE” sign at the 5 meters place  aside the machine, mustn’t use the machine within the  tindery and explosive environment.
11) Mustn’t operate the machine without any paint can inside  the machine.
12) Max mixing weight is 30KG
13) If there is any expected voice, press the emergency  bottom to stop the machine and restart the machine again  after check and solve the malfunction.
Main  function
1) Mixing time can be set  from 1-15 minutes
2) Automatically stop when time is up, and will give out a  sound of “ Ding” to remind the operator.
3) Safety inter-lock prevents the cabinet door from being  opened while the machine is running and it will stop  automatically for the door is connected to the electric  power.
Key button
Installation  and readjust
(1) Basic requirement: Firm  and level concrete ground
(2) Readjust the 4 legs of the machine to make it put on the  level place.
(3) Move the machine with suitable tool to avoid overturning  the machine.
Process and  methods of using the machine
1.First open the packaging,  take the machine out and put it on the firm and level ground  (if the ground is not level, readjust the 4 legs of machine  to make sure it will work on a level place)
2. Must take off the steel bar first to operate the  machine.(Picture A-D)
A: Turn the  hand wheel anticlockwise to raise the clamping board to the  max height which is suitable for the big can.
B: Will see a steel bar and sheath when open the clamping  board.
C: Knock down the steel bar and sheath.
D: Nothing will be seen in the shaking frame.
E: Push the uphold board with hand gently, it should swing  freely
F: Should take off the hand wheel from the shaking frame  before connect the machine to the electric power.
G: Insert the electric plug into the AC110V tri-case  electric outlet which should connect to the earth.
3.Open the front door and press the paint can cover firm and  put it into the machine, turn the hand wheel according to  the arrow direction to clamp firm the paint can, and then  make firm the screw deasil.
4. Close the front door and reposition the emergency button  to start the machine.
5.Turn the TIMER according to your need, and then the  machine starts to work. (The longest time can be 15 minutes)
6.Press the EMERGENCY to stop the machine in urgent (Don’t  forget to reposition the EMERGENCY to restart the machine  next time)
7.There is a safe guiding button at the left side of the  front door, the machine will stop when the front door is not  close firm or is open during operation.
8.When time is due, the TIMER will automatically stop the  machine with a sound of “ Ding”. The operator can open the  front door at this time and loosen the locknut in the  direction of anticlockwise, turn the hand-wheel according to  the arrow direction , loosen the press board and then take  out of the paint can.
Matainence
To assure the usual working,  extend the use-life, play its economic value greatly, should  do a good daily maintenance. Notice:
1)Only the  repair man can knock down this machine
2)Should cleanup the leak paint after use to keep the  working platform and pole clean.
3)Lubricate the pole, bearing, springs periodly, and the set  the cycle according to your need.
4)Should not use the acid liquid to clean the floor.
Should wear the industrial protecting gloves and cut off the  electricity before doing the maintenance and check.
Item Include
(154001)
A set of
110V Manual Clamping Paint Shaker
Shipping & Handling Details
Default  Shipping Cost or Free Shipping Information:
▲
Default  shipping cost or free shipping service is only for the customers  from Canada or the lower 48 United States by Canada Post, USPS or  the UPS Ground. Customers from other areas or needs other shipping  ways, please contact us.
▲
Buyers  from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska,  Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there  WILL be extra shipping costs, please contact us for more detailed  information.
▲
Please  make sure your address is valid for both UPS and USPS services. Any  costs incurred because of incorrect or undeliverable address should  be undertaken by buyer.
Handling Time:
Shipping  is usually made in 1-3 business days after payments cleared. Orders  are processed from Monday-Friday; Not on the weekends & public  holidays.
Sales tax / Customs  duties:
Any  sales taxes or Customs duties are not included. If came out, they  must be undertaken by the buyer.
Damage In Shipping:
Email  or call us First! We will work with you to get the case resolved in  the fastest method.
Return /  Refund
If you are not 100% happy with your purchase, please  contact Us. Please don't directly opened a request or case without  informing us, or else, we will do some discounts on the warranty and  other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲
All  returns must be made within 14 days of delivery date. Items must be  in new, unused condition, with all original materials included with  the shipment. A partial refund may be applied for opened or damaged  items, depending on the condition.
▲
Items  returned under the buyer’s remorse: The return shipping fee must be  covered by the buyer; The original shipping cost will also be  deducted from the refund. 15% restocking fee of the items purchase  price will be charged.
▲
Returns  that are the result of our seller's error: Buyer will receive a full  refund of the item as well as shipping charges
▲
All  returns require a RA (Return Authorization) number that will be  given by our seller. Please contact with us at first for more  details.
Defective & Damaged Products
▲
If  product was received damaged or not as described, please send us  some pictures or videos, so we could well understand your problem,  then solve them for you ASAP. Besides, it's much helpful for us to  claim with UPS, remind our related department to pay much more  attention to packaging later on. Hope for your understanding.
▲
Replacement  or refund of defective or damaged products can only be returned in  exchange for the exact same product, or else, the purchase price  will be refunded back to your original payment method.
▲
If  an item is received damaged, customer service must be contacted  within 7 days of receiving your item. All returns require a RA  (Return Authorization) number as above.
Payment
eCheck Issues:
Payments via  eCheck do not clear immediately. Usually you will wait 5-7 days  after checkout for it to clear. Then we will arrange shipments  for you.
Warranty & Feedback
▲
6  months' warranty for the machines, not for the consumables. We stand  behind our products all the item, so even if your warranty period  has expired, you can still seek for service or technical support  from us with low cost.
▲
Any  warranty shipping cost to us is responsible by buyer.
▲
Any  shipping cost to buyer is responsible by the seller.
▲
We  committee to the customer satisfaction and want to bring you the  best purchase experience. If there is any problems, please contact  us ASAP. If not, please leave us a positive feedback as it's very  important for us. Thanks very much.
On Sep-23-21 at 19:59:04 PDT, seller added the following information: