Keypad Multi-Code 4200 Wireless Digital Keyless Entry MCS420001 300MHz Lot of 2

Description

Untitled Document
Our Store
About Us
Multi-Code 4200 Wireless Digital Keyless Entry Keypad MultiCode MCS420001 300MHz.
NOTE:
1 Lot of 2 items.
The Model 420001 Wireless Keypad is a weather-resistant keyless entry station transmitter. Entering a programmable 4-digit access code sends the programmable radio code to the receiver to activate the door or gate operator. The transmitter is powered by a 9-volt battery, has a test/operate indicator, and keys that light during use. When the battery gets low, the keypad will blink during use to indicate that the battery needs changing.
The transmitter is Multi-Code format providing 1,024 possible radio codes. The transmitter will only activate receivers set with the same code programmed into the keypad.
The Model 420001 is compatible with 300 MHz Multi-Code receivers and Model 109950 and 302850 receivers.
Features
- Compatible with 300 MHz Multi-Code receivers
- 4-digit access code
- Backlit keys
- Easy access to battery
- Power: 9-volt battery
- Codes: 1,024 (set by dip switches)
- RF frequency: 300 MHz
- Dimensions: 2.75" W x 6.25" H x 1" D
IF YOU ARE MOUNTING YOUR KEYLESS ENTRY SYSTEM TO ALUMINUM
SIDING
you may find it better to substitute carriage bolts for the mounting screws
supplied. Bolts should be long enough to reach into the garage, and be secured with
lockwashers and nuts.
IF YOU ARE MOUNTING YOUR KEYLESS ENTRY SYSTEM
ONTO BRICK, STONE, OR MORTAR
, suitable anchors must be set into the mortar,
and the fasteners screwed into these.
INSTALLATION
When mounting location has been determined, drill one 1/8" pilot hole one inch (1")
deep for top screw. Insert screw into pilot hole, leaving the head of the screw exposed
about 1/8" from the wall. Slide the unit over the exposed screw so that it hangs on the
wall.
To install second mounting screw you will need to remove battery hatch and 9 volt
battery. To remove battery hatch insert
Flathead
screwdriver with a twisting motion into
the slot provided on the bottom of keypad. Remove the battery to expose second mounting
hole. Mark the location of the pilot hole and remove keypad. Drill 1/8" pilot hole one inch
(1") deep. Replace keypad and insert screw. Reinstall battery and replace battery cover.
PROGRAMMING
Your Keyless Entry System comes with a preset factory codes (2, 4, 6, 8, 10) for the
radio code and (1, 2, 3, 4) for the 4 digit access code. We urge you to reprogram
the unit with your own personal codes to prevent tampering.
RETURNS
30 day returns
. Buyer pays for return shipping
SHIPPING
Standard Shipping
(
FedEx Ground
or
FedEx Home Delivery®
, 1 to 5 business days )
Estimated delivery date
The estimated delivery date is based on the seller's handling time, the shipping service selected, and when the seller receives cleared payment. In certain cases, the estimated delivery date will vary. By knowing the estimated delivery date, you can determine how long it will take to receive your item.
Shipping services
Some shipping services provide an estimate for the number of days that it will take the carrier to deliver the item to the buyer. This transit time does not include the seller's handling time. Transit time includes normal weekdays. Often Saturdays, Sundays, and major holidays are not included in transit time estimates.
*Customers outside the continental USA must contact us for a freight quote prior to making a purchase. continental usa shipping prices do not apply to Puerto Rico , Alaska, Guam, Canada & International.
PAYMENTS
We suggest that you use
PayPal
for your purchases