Raymarine ECI-100 Universal Engine & Control Interface

Description

This was used as a display item only in our ship store. Not handled day to day. Just time to clear out and change display. Full warranty from raymarine. Never registered. Price is reduced to move inventory. MSRP is 9.99
ECI-100 Universal Engine & Control Interface
The ECI-100 Universal Engine and Control Interface is an innovative and affordable solution for bridging engine instrumentation and drive-by-wire steering with Raymarine autopilot and navigation systems. A simple isolated CAN Bus solution, the ECI-100 offers reliable integration with Raymarine's latest generation of multifunction displays and also delivers a seamless autopilot steering interface to Raymarine's Evolution EV-2 Drive By Wire autopilot system.
Benefits:
A simple, single point of connection for engine data and drive-by-wire autopilot control
Affordable and uncomplicated solution eliminates the need for multiple engine and autopilot gateways
Brings Raymarine's Evolution 9-axis sensor and adaptive autopilot control to drive-by-wire propulsion without the need for a proprietary autopilot gateway
View engine data displays and enjoy full autopilot control alongside Raymarine's industry-leading radar, sonar and navigation technologies using a single touch screen display.
From our space saving aSeries, to our flagship big screen gS Series, engine information displays and autopilot control are available on any display running LightHouse v8 or later
Access easy to customize displays to show engine performance data, fuel consumption, alarms, and much more
View engine information displays on your smart phone or tablet with Raymarine mobile apps
Simple to install ECI-100 makes engine and navigation integration a reality for virtually any size vessel
ECI-100 Engine Data Parameters
The ECI-100 Universal Engine and Control Interface identifies the following parameters:
Engine speed
Engine oil temperature
Engine temperature
Engine oil pressure
Engine coolant pressure
Engine fuel rate
Boost pressure
Battery potential
Transmission oil pressure
Transmission oil temperature
Total engine hours
Fuel tank level
Trip fuel used (calculated by ECI-100)
Alternator potential
Engine torque
Engine percent load
Transmission gear
VIN (not shown on the display)
Software number (not shown on the display)
Simple Integration, Powerful Performance
The ultra-compact ECI-100 connects directly to the industry-standard NMEA2000 or SAE* J1939 Engine Data Bus used by major marine engine manufacturers including:
Volvo Penta
Yamaha Marine (Command Link Plus only)
Caterpillar
Yanmar Marine
Raymarine is committed to delivering seamless integration with leading marine engines. Visit www.raymarine.com for the latest engine compatibility information.
An industry standard DeviceNet port connects the ECI-100 to manufacturer specific CAN bus cabling. The ECI-100 then connects to NMEA2000 networks using the SeaTalk
ng
cabling system. Each of the ECI-100's isolated ports is powered independently ensuring reliable, worry-free performance from both navigation electronics and engine systems.
* SAE - Society of Automotive Engineers standard
Compatible Honda Engine Systems
Your ECI-100 is compatible with the following Honda engine systems. It has the ability to display engine data on Raymarine’s latest generation of multifunction displays.
Important: Please check with your local engine dealer to ensure that you have a compatible system fitted to your boat before proceeding.
Engine Data Only
BF80
BF115D
BF100
BF135A
BF140D
BF150A
BF50D
BF200AKI
BF60D
BF225A
BFP60A
Compatible Yamaha Outboard Engine Systems
Your ECI-100 connects to Yamaha outboard engine systems, as shown in the diagram above.
The ECI-100 is compatible with the following Yamaha electronic control systems:
Command-Link
Command-Link Plus
These Yamaha outboard engine systems have the ability to display engine data on Raymarine’s latest generation of multifunction displays using the ECI-100.
Shown below are Yamaha engines which may have a compatible Yamaha electronic control system fitted.
Important: Not all engines have a Command-Link or Command-Link Plus system fitted as standard. Please check with your local engine dealer to ensure that you have a compatible system fitted to your boat before proceeding.
Engine Data Only (when Command-Link or Command-Link Plus electronic engine control system is fitted)
F50
T50
F60
T60
F75
F90
F115
LF115
F150
LF150
F200
LF200
F225
F250
LF250
F300
F350
Z150
LZ150
VZ150
Z175
Z200
LZ200
VZ225
Z250
LZ250
VZ250
Z300
LZ300
VZ300
Compatible Volvo* Systems
Your ECI-100 connects to the Volvo Penta engine* EVC system, as shown in the diagrams above.
The ECI-100 is compatible with the following Volvo Penta engine* EVC systems:
EVC-C
EVC-D
EVC-E
These Volvo Penta engine* EVC systems have the ability to display engine data on Raymarine’s latest generation of multifunction displays using the ECI-100.
What’s more, when an IPS or Aquamatic system is fitted with one of the compatible EVC systems, the ECI-100 enables Raymarine’s Evolution 9-axis sensor and adaptive autopilot full control of drive-by-wire steering without the need for a proprietary autopilot gateway.
Shown below are Volvo Penta* engines which may have a compatible EVC system fitted.
Important: Not all engines have an EVC system fitted as standard. Please check to see if the EVC is fitted, and of the correct type as shown above.
Engine Data and Autopilot Steering Interface
D3 Aquamatic
IPS500
D4 Aquamatic
IPS550G
D6 Aquamatic
IPS600
V6 Aquamatic
IPS800
V8 Aquamatic
IPS900
IPS350
IPS1050
IPS400
IPS1200
IPS450
Engine Data Only (Diesel engines which are EVC-equipped as standard)
D3
D11
D4
D12
D6
D13
D9
Engine Data Only (only if the optional EVC system is specified)
V6 Gasoline Stern Drive
D2 Sail Drive
V8 Gasoline Stern Drive
D3 Sail Drive
D1 Sail Drive
D4-180 Sail Drive
* Volvo and Volvo Penta are trademarks™ and/or registered® trademarks of Volvo Trademark Holding AB. Raymarine is not affiliated with, or endorsed by, Volvo.
Compatible Yanmar Engine Systems
Your ECI-100 is compatible with the following Yanmar engine systems. It has the ability to display engine data on Raymarine’s latest generation of multifunction displays.
Important: Please check with your local engine dealer to ensure that you have a compatible engine pre-installed with a NMEA 2000 system fitted to your boat before proceeding.
Engine Data Only
✔
4JH45
✔
4JH57
✔
4JH80
✔
4JH110
✔
4JH45C
✔
4JH57C
✔
4JH80C
✔
4BY3-150
✔
4BY3-180
✔
4BY3-220
✔
6BY3-260
✔
8LV320
✔
8LV370
✔
6LY3-UTP
✔
6LY3-STP
✔
6LY3-ETP
✔
4BY3-150Z
✔
4BY3-180Z
✔
4BY3-220Z
✔
6BY3-260Z
✔
8LV320Z
✔
8LV370Z
Compatible Caterpillar Engines
All CAT Engine installations that include the engine displays, color MPD, MPD or mini MPD
The color MPD (Marine Power Display) is compatible with all currently available CAT electronically controlled marine engines from the C7 to the 3500C Series
The MPD display is compatible with CAT 3126B to 3500B Series
Only CAT Systems with individual MPD’s dedicated for each Engine can be supported.
Engine systems without a dedicated MPD is not supported
The CAT Messenger Display is not compatible or supported.